Should You Replace Your Home’s Popcorn Ceilings With a Smooth Surface?

Should You Replace Your Home’s Popcorn Ceilings With a Smooth Surface?

 

Travel far and wide throughout the United States, and hardly anyone will have a kind word for popcorn ceilings. Also known as acoustic ceilings, they were popular in residential construction during the 1930s into the late-‘70s. Occasionally, a builder would add sparkles so the ceiling would twinkle at night in the incandescent lighting. Today, popcorn ceilings aren’t just out of style – they’re proven deal-breakers when homeowners who haven’t seen fit to resurface them list their house for sale.

 

Which leads to our big question: Should you remove your ceiling’s popcorn surface and replace it with a smooth surface?

If you plan to sell your house soon, and it’s in a desirable neighborhood, yes. If you’ve been happily ensconced in your home for decades, you may not realize how truly reviled popcorn ceilings are among contemporary homebuyers. Just watch the numerous home buying shows on cable TV and take note of the reaction when prospective buyers look up and catch sight of a popcorn ceiling. It isn’t pleasant.

 

Orlando Popcorn Ceiling Removal, Florida Popcorn Ceiling Removal

 

Popcorn ceilings – a brief history

Characterized by their textured look by being sprayed on with a hopper gun using a special mix, popcorn ceilings were much more economical than hand-troweled plaster ceilings because the surface was quick to apply and hid imperfections – whereas plaster required painstaking application to achieve a perfectly smooth surface. When drywall took preference over plastering, the popcorn surface easily concealed the seams. The textured surface also provided sound-dampening benefits.

Despite the wide time range of popcorn ceilings (the surface was reportedly still being used at the turn of the 21st century), their heyday was the ‘60s through ‘70s, during the boom of the suburbs.

The bumpy textured ceilings always had issues, however. They trapped dirt and grime, and were difficult to clean without inadvertently dislodging some amount of the “popcorn.” Making ceiling repairs inconspicuous was likewise challenging.

The downfall for popcorn ceilings came when the danger of asbestos became well known.

 

As described by general contractor Glenda Taylor, writing for BobVilla.com:

“Asbestos, a naturally occurring fibrous silicate mineral, was the material of choice for popcorn ceilings until the substance was banned as a health hazard in 1978. Manufacturers switched to paper fiber that year, but suppliers continued to sell existing stores of asbestos-laced material. That means that popcorn ceilings installed as late as the mid-’80s could contain asbestos, and, when disturbed, disperse microscopic fibrils known to cause lung-scarring illnesses and even lung cancer if inhaled.”

 

 

How to tell if a popcorn ceiling is safe

A popcorn ceiling that contains asbestos doesn’t pose a hazard as long as the ceiling isn’t disturbed. However, many people don’t want such a dangerous substance in their home, and aren’t willing to take the risk. Also, in Central Florida, homes are more susceptible to structural damage during hurricane season. A tree crashing through the roof of a home with a popcorn ceiling containing asbestos will release it into the air, after which it will settle on interior items and the floor.

To determine if your popcorn ceiling has asbestos, forgo the approach of taking a sample yourself, and call an EPA-certified remediation company to do the job. Should the report come back positive, do not attempt to remove it yourself. This is not a DIY project. Risking your life – and the lives of your family members – isn’t worth saving the expense of professional remediation.

 

If a popcorn ceiling is safe, but still unsightly

Even an asbestos-free popcorn ceiling can be undesirable simply because it’s outdated. Thanks to changing consumer taste, their advantages are overlooked – much the same as homebuyers expect stainless steel kitchen appliances and turn up their nose at perfectly good white or black appliances.

One advocate for popcorn ceilings is “Steve,” an agent with Crossland Team Real Estate, Austin, Texas. His blog post on the topic is a practical take on their unappreciated positive qualities and the motivation of so many to scrape and resurface them into smooth oblivion.

Steve writes:

“People hate popcorn ceilings. But as I look at my own vintage 1978 popcorn ceilings, and how perfect they are, I wonder what all the fuss is about … Please, somebody agree with me and let’s admit that this obsessive neurosis about the texture and appearance of a popcorn ceiling is nothing more than ‘“texture snobbery.”’

Removing an asbestos-free popcorn ceiling is typically recommended for the experts on the basis of labor and time. Such ceilings are throughout the entire house, save for kitchens and baths. Tackling the job yourself may be practical if you’re highly experienced in home renovation projects and bought a “fixer” to rehab, and you don’t intend to move in immediately. For the DIY enthusiasts, YouTube offers numerous step-by-step videos on the removal process.

 

 

Otherwise, hiring a home renovation contractor to do the removal and resurfacing is the more practical – and ultimately economical – approach.

The Paint Manager offers experienced popcorn texture removal and replacement with an even, smooth surface that reflects quality craftsmanship. Contact us to learn more and schedule an appointment. While we usually leave our call-to-action message for the end of our blog post, here’s some helpful advice for those who choose to carry on.

 

Loving your popcorn ceiling

For the “Steves” out there who love their popcorn ceilings – or don’t have the budget to replace them – DIY repair is possible, as long as you’re sure they don’t contain asbestos. Popcorn ceiling repair products are available at any home improvement center.

First, scrap the damaged area about one inch larger than the repair needed. Sand, wipe with a damp cloth, apply a stain blocker and let it dry thoroughly. Then apply the ceiling patch product according to manufacturer’s instructions. Apply only one coat at a time. Let the area dry completely before applying another coat. Keep in mind that no matter how carefully you do the repair work, it is difficult to match the original ceiling texture.

No matter which choice you make about your popcorn ceiling, The Paint Manager is always available to take on the home renovation projects you need, with conscientious, experienced service. If you don’t feel confident in making a DIY repair, we can help there, as well! No job is too small for our home repair experts.

Sandblasting 101: How to Prep Your Home & Get it Done Safely

Sandblasting 101: How to Prep Your Home & Get it Done Safely

 

Preparing your house or other structure for repainting is essential to achieving a smooth, clean surface to which the paint will adhere properly for an even appearance and long service life. For homes that have several layers of exterior paint that’s cracking, peeling and gatoring, slapping on another coat of paint is counterproductive. And removing the old paint manually through scrapping just isn’t practical. In such a situation, sandblasting – also known as abrasive blasting – is the only solution.

Sandblasting is the process of forcibly propelling a stream of abrasive material against a surface under high pressure to clean, smoothen, or roughen up a surface. The common name is actually a misnomer, as many types of materials can be used. While some homeowners try to go the DIY route, this is really one job that should be left to the pros, as it poses serious health hazards for amateurs – who aren’t likely to own the proper protective gear or know proper technique.

However, we’re aware of professional or aspiring house flippers who have good hands-on skills out of necessity. The properties on which you can get a good deal typically aren’t in great condition. Here’s a basic guide to economical sandblasting that keeps safety front and center.

 

The cost of sandblasting a house

Cost varies, depending on the size of the project, construction material of the structure and abrasive material used. The cost of the sandblasting project increases with the increase in the size of the area and the increase in the difficulty to remove the material.

 

Safety considerations

While many other abrasive materials are now used, silica sand remains popular. Silica is a mineral compound called silicon dioxide which is in crystalline or amorphous form. Crystalline silica is hazardous to health. It is usually found in quartz, but also found in substances like tridymite, cristobalite and tripoli. Inhaling crystalline silica dust can cause silicosis and various other diseases.

In 2016, the Occupational Safety and Health Administration (OSHA) issued a directive to control exposure to respirable crystalline silica. The rule comprises of two standards – one for Construction Code of Federal Regulations and the other for General Industry and Maritime.

For respiratory protection, wear a respirator approved by the National Institute for Occupational Safety and Health (NIOSH). This should cover the head, neck and shoulders.

 

Other protective gear should include the following:

  • Protective helmet
  • Protective clothing, including gloves
  • Safety shoes or boots
  • Ear protection

 

How to prep your home for sandblasting

Many Central Florida homes are concrete block construction – known in the trade as concrete masonry units (CMUs). Concrete block homes may be painted or stuccoed over. Test-blast a small area before proceeding. The type of paint (ordinary latex or elastomeric paint) and the number of coats will determine how difficult it is to remove. The closer and longer you blast the block, the more cement and aggregate you are likely to take off from the surface.

You need to be careful when it comes to the mortar between the block, particularly the vertical joints which are also called head joints. The mortar can blow out, which creates openings called bee holes. These openings act as entry points for insects and water. Patch these holes with fresh mortar, which is known as tuck pointing. Professionals are recommended to do this job, as staining and an imperfect appearance can result when improperly done.

To protect windows, cover them properly. Masking tape and red and grey tape are not usually the right option. Experts recommend using clear six mil plastic sheeting to cover windows. Use one sheet per window, double tape it continuously all around. Cover all doors that are not to be sandblasted to protect them from debris.

Also, make sure that you don’t blast stucco or CMU dry. Also ensure that you don’t sandblast a surface if there is a chance that there is asbestos or lead in it. If there’s a question about this, have the paint tested. If so, it definitely will necessitate removal by a professional.

You should also use a high-pressure sprayer, not just the hose, after sandblasting to remove sand and masonry grit. You also most likely will have to clean up the wet abrasive material around the area where sandblasting is done.

 

As we said at the beginning, if you’re not an ambitious house flipper or DIY-seasoned homeowner, sandblasting is best left to those with the experience, skills and equipment.

Our pros at The Paint Manager can carry out sandblasting efficiently and safely. Contact us to learn more.

 

Go Top
Skip to toolbar